Inventory

• GENERAL G TYPE FILTER
• WESTWOOD F100-10
• PUREPRO F100-10W
• MITCO 264-91M

Hand Wheel for Fusible Firomatic Valves, 165°F (Silver)

Beckett # 12510

1/2"X1-1/2" Black Iron Nipple

1/2x11/2 Black Iron Nipple

1-1/4"x12" Black Iron Nipple

11/4x12

1/2"X3" Black Iron Nipple

1/2x3 Black Iron Nipple

1/2"X4" Black Iron Nipple

1/2x4 Black Iron Nipple

1/2"X10" Black Iron Nipple

1/2x10 Black Iron Nipple

1/2"X7" Black Iron Nipple

1/2x7 Black Iron Nipple

1-1/4"x5-1/2" Black Iron Nipple

11/4x51/2

3/4"x9" Black Iron Nipple

3/4x9 Black Iron Nipple

This non-potable water expansion tank is designed for use in commercial and residential closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief setting of the relief valve. This carbon steel tank is pre-charged at 12 psi, tank volume is 4.5 gallons and features a durable expansion membrane that prevents contact of the water with the air in the tank. This rugged butyl diaphragm minimizes loss of the air change and ensures long and trouble-free life for the system. This tank is made of carbon steel with epoxy finish, mounts to supply piping, 1/2 inch MNPT system connection and a 0.302-32 inch charging valve connection (standard tire valve) to facilitate on-site charging of the tank to meet system requirements. The maximum working pressure is 75 psi (5.3 bar).

Amtrol ST-5 (Therm-X-Trol) is a water heater expansion tank, designed for use in domestic hot water heating systems to eliminate the potential hazards of water expansion. Water heater expansion tank is commonly installed in a domestic hot water system that contains a backflow preventer, a check valve or a pressure reducing valve.

12970 Beckett Angle Burner Firomatic Valve 3/8" Flare Inlet x 1/4" MPT Outlet Fusible  (2" LONG)

B104CFXL Beckett Burner Firomatic Long

1-1/4" Speedfill 45 Degree Female Connector

(11/4 scully 45 female connector)

• 4L Series 1/2" X 40" V Belt
• 4L-400
• A Series  A38 Belt

335FT-High Temperature Foil Tape 2.83"x50.3 Yards

• Product Construction
  Single-Coated Tape
• Color(s)
  Custom Color
• Custom color(s)
  Aluminum
• Gauge / Mil
  3.8 mil
• Carrier / Support / Facestock
  Foil
• Adhesive Type
  Acrylic
• Liner Type
  Paper
• Operating Temp Range
  -50 to 500 °F
• Performance Category / Characteristics
  Environmental Resistance, UV Resistance, Moisture/Water Resistance, Low VOC

3/4" Press Ball Valve, Full Port (Lead Free)

3/4 press Ball Valve

3/4"X10' Type L Copper Tubing

3/4x10 Type L Copper Tubing

1"X10' Type M Copper Tubing

1X10 Ft Type M Copper Tubing

• Combination Pressure and Temperature-1/4" NPT Short Shank Boiler Gauge
• Dual Scale Temperature and Pressure Gauge Display
• Tempurature Range 30°-250°F
• Pressure Range 0-60 PSI
• Connection 1/4" NPT
• 2-5/8 OAL Insertion Length
• 1/2" From Base to End of Threads

• Combination Pressure and Temperature-1/4" NPT Long Shank Boiler Gauge
• Dual Scale Temperature and Pressure Gauge Display
• Tempurature Range 30°-250°F
• Pressure Range 0-60 PSI
• Connection 1/4" NPT
• 3-1/2" OAL Insertion Length
• 1-7/8" From Base to End of Threads

Cap for Speedfill Oil Fill Pipe Nozzle Adapter

(Scully cap)

1-1/4" Slip On Vent Cap

S220-8 Tigerloop Ultra Oil De-aerator and Spin-On Filter, Model TJN, UL Listed

• Removes air bubbles and foam from the fuel.
• Combines the benefit of a two-pipe fuel supply with a single-pipe.
• Reduces potential leak hazard by eliminating the return line to the tank. 
• Extends filter life by reducing fuel flow through the filter.
• Preheats the fuel up to 25°F for better combustion.

• Max. nozzle capacity: 20 GPH
• Max. return oil pumped into Tigerloop: 30 gph
• Max. oil flow: 50 gph
• Operating Temperature: 20° - 105°F
• Max. Ambient Temperature: 105°F
• Max. operating pressure in feed line: 8 PSI
• Connections: 1/4"-NPT (F)
• Fuel type: Nos. 1 & 2, B5 BioHeat Biofuel
• Replacement Element: F100-10
• Element Media: 10 Micron
• Element Canister: Epoxy Inside
• Approval: UL LISTED

#31 Steam Vent for Convectors and Risers

• 1/8" Male Connection
• Vent Port 1/16"
• Operating Pressure 6 Psi
• Height: 3-3/4"
• Adjustable: No

2" Slip On Vent Cap