Images are representations only.

SS-2-TJERNLUND COMPLETE POWER VENTER FOR GAS OR OIL W/UC1 CONTROL

Part Number: SS-2 Brand: Tjernlund Draft & Ventilation

SS-2-TJERNLUND COMPLETE POWER VENTER FOR GAS OR OIL W/UC1 CONTROL

Price
Request a Quote
Stock
1 In Stock
Does not ship to OH, United States
 Power Venter Kit For Oil 70,000-168,000 BTU 4" Inlet. For Fan Assisted Nat. Or LP Gas (40,000-150,000 BTU For Atmospheric Nat Or LP Gas 40,000-150,000. Max Equiv. Of 50 Feet For All
With UC1 Control
 
Required Opening 8-1/2"H x 10-1/2"" Through The Wall
4" Vent Connector
Install Full Size Vent Pipe and Reduce at SS2 Connector
Features
  • The SS2 is a mechanical vent system designed and 
    listed for use with natural draft oil and gas heating
    equipment. It is factory assembled and wired.
  • The SS2
    automatically vents the flue gases from heating equipment to the outdoors.
  • By recirculating indoor air with
    a cooling fan, surrounding combustible materials
    remain at safe temperatures.
  • After each burner cycle
    the SS2 will continue to operate for an adjustable
    period to purge the heater and vent of residual 
    flue gases.
  • The SS2 features a 3-way safety system
    consisting of the UC1 Interlock Control, Fan Proving
    Switch and High Limit. These devices monitor the
    SS2 performance and will disrupt the burner if a
    vent system malfunction is detected
 Power Venter Kit For Oil 70,000-168,000 BTU 4" Inlet. For Fan Assisted Nat. Or LP Gas (40,000-150,000 BTU For Atmospheric Nat Or LP Gas 40,000-150,000. Max Equiv. Of 50 Feet For All
With UC1 Control
 
Required Opening 8-1/2"H x 10-1/2"" Through The Wall
4" Vent Connector
Install Full Size Vent Pipe and Reduce at SS2 Connector
Features
  • The SS2 is a mechanical vent system designed and 
    listed for use with natural draft oil and gas heating
    equipment. It is factory assembled and wired.
  • The SS2
    automatically vents the flue gases from heating equipment to the outdoors.
  • By recirculating indoor air with
    a cooling fan, surrounding combustible materials
    remain at safe temperatures.
  • After each burner cycle
    the SS2 will continue to operate for an adjustable
    period to purge the heater and vent of residual 
    flue gases.
  • The SS2 features a 3-way safety system
    consisting of the UC1 Interlock Control, Fan Proving
    Switch and High Limit. These devices monitor the
    SS2 performance and will disrupt the burner if a
    vent system malfunction is detected